Terms and Conditions

---

 Terms and Agreements Warranty - Bathtubs, wall tile, countertops and fiberglass fixtures are warranted against failure of adhesion of the applied finish for a period of two years for residential and one year for commercial use. Sinks, floors, spot repairs, slip resistant surfaces and other refinished surfaces are warranted for a period of one-year against failure of adhesion of the applied finish. For items such as grab bars and easy step installations is warranted for a period of one year. Any product warranty is provided by the manufacturer. In the event of any failure of adhesion covered under this warranty, Precision Coatings of Texas will repair the failed area. The color of the repair may vary with time and conditions. Caulk, rust stains, reoccurring rust, plumbing mildew and mold are not warranted. Any warranty claim must be submitted with pictures and a detailed description that is approved by a PCT manager.  - The limited warranty covers only the failure of adhesion. The following incidents or practices can damage or degrade a refinished surface and will void any warranty.  A) Chips, scratches or other impact damage caused by sharp or calling objects whether from accidental or intentional abuse. B) The use of chemicals, hair dyes, poperies or other products that stain or damage the finish. C) Surface remaining continuously wet from items such as bathmats (without drying in between uses), improper drainage, leaking/dripping plumbing or standing water for extended periods of time.  D) Any movement in the substructure of the surface which in turn causes movement in the refinished surface resulting in a crack or split in the refinished surface or grout lines.  E) Damage from any activity or use which is not normal or intended use by the original manufacturer. Care and Cleaning - Refinished surfaces must be allowed to cure for at least 24-48 hours, as instructed by the manufacturer. Do not touch or use the surface during these times. Damage from contact prior to recommended cure times may require reapplication and additional costs. Refinished surfaces must remain free of moisture or water during the curing time.  Use only non-abrasive, liquid cleaners such as formula 409, Lysol tub and cleaner or scrubbing bubbles on your refinished tub, tile or any refinished surfaces. Do not allow any chemical cleaners to remain on a refinished surface for any extended period. Rinse thoroughly and wipe the surface with a soft sponge or cloth.  Regarding bath salts, salt will generally degrade most any surface or finish with prolonged contact, which is why we discourage its use in a refinished tub. Bath salts can also be abrasive diluted in water because of the other trace minerals that remain on the tub surface. If you choose to use these types of products, your tub should be cleaned with a non-abrasive cleaner after every use with salts of any kind. Even with proper cleaning, bath salts can damage refinished surfaces with excessive or prolonged use.

 Color –You must approve the color chosen for your surface refinishing. Please take the time to choose your color carefully and understand your options for your project as the color applied will not be changed except by reapplying new material at the customer's expense. You understand that our samples are not identical and will vary from sample to application. (room lighting, sun and color choices) If you would like another color to be applied once the job is clear coated, there will be an additional charge to redo the project. You understand that applications will not be perfectly smooth.

 Caulking – Caulking is a maintenance item that is not covered by any warranty. Unless caulked area has been refinished.

 Plumbing - Our Technicians are not certified plumbers. They are not authorized to do any plumbing. We only mask off  drains instead of removing them. We will remove overflow plates if the screws are not rusted or give resistance to  removal. Any not typical work is your responsibility. If any drains, pipes or plumbing hardware are removed or adjusted at  your request, it is done only as a courtesy, and you agree to hold us harmless from any resulting damage or subsequent  costs of any kind related to your plumbing. 

Masking - Surfaces around the area to be refinished are masked with painters' tape, paper and plastic. Masked areas  including paint, floors, wallpaper & cabinetry (wood stained, varnished and painted) are subject to damaging when  removing masking tape.  PCT will take proper precautions to avoid any damage to all surfaces but is not liable and will hold us harmless from and  resulting damage subsequent cost of any kind related to the removal of masking tape.  Appliances - You are responsible for moving all appliances including but not limited to fridges, stoves, dishwashers,  washer and dryers before any work begins. These items can damage the flooring in some instances. If you request that  we move any of these objects, you understand and will not hold us accountable for any costs related to moving  appliances or objects. 

Odors – There will be an odor from the start of every process. If you are sensitive to solvent based materials, then you should remain out of the immediate area during the application. We do exhaust during the spraying process of our application, but all solvent applications will leave an odor for several days. You understand and agree to hold Precision Coatings of Texas not liable for any damages or costs related to odors generated from our process. Preparation – Please remove all loose items from the room before our technician arrives to do the refinishing. This includes curtains, pictures, accessories, rugs, etc. 

 Slip or Fall - Precision Coatings of Texas offers a slip resistant additive to give the desired area a texture to reduce the possibility of injury from slipping or falling. PCT also offers grab bars for additional safety. The customer agrees and understands the installation of any of these features is preventive and will not hold PCT harmless to any claims, liabilities, and/or damage resulting from any slip or fall which may occur on or near a refinished surface. Scheduling – Please call us immediately if you have any questions or problems, or if a scheduling conflict arises. If scheduling changes are necessary, please give us at least two business days' advance notice. If advance notice is not provided, then Precision Coatings of Texas will charge a cancelation fee. 

Terms - We accept Cash, Check or Credit Card. Please be present to inspect the work and to make a final payment. All  interest, late fees, processing fees, collection fees, and legal fees will be added to any past due balances. A Lien may be  filed for any amounts owed.